Thrustmaster T-LCM Pedals, User Manual

Page: 12 / 331

11/16
USING THE PEDAL SET WITH A THRUSTMASTER RACING WHEEL BASE
= REMOVABLE RJ12 CABLE (2) REQUIRED
(The removable USB cable (1) must not be connected to the pedal set during this type of use.)
COMPATIBILITY: PC AND GAME CONSOLES
VERY IMPORTANT
In order to ensure optimal operation of the pedal set connected directly to a
Thrustmaster racing wheel base (TS-PC Racer, T-GT, T300, T150, TS-
XW, TX and TMX), you must update the racing wheel base’s firmware with
the latest version available at https://support.thrustmaster.com . This
new firmware will let you get the most out of the T-LCM Pedals pedal set’s
high level of precision, and use your personal settings made via the
calibration software.
- Once the Thrustmaster racing wheel base’s firmware has been updated, connect the pedal set at the
back of the racing wheel base using the removable RJ12 cable (2) .
- Connect the racing wheel to your PC or game console.
- The MODE LED on the base of your racing wheel flashes 5 times to indicate that the pedal set
is properly recognized, for optimal operation.
In the event that the MODE LED does not flash as indicated above, this indicates that the base of your
racing wheel has not been updated with the latest available firmware, and that the pedal set is not
recognized as a high-precision T-LCM Pedals pedal set, but rather as a standard T3PA or T3PA PRO -
type pedal set.
YOU ARE NOW READY TO PLAY!
Please note: In this configuration, an official Thrustmaster wheel rim must be installed on the base of
your racing wheel. Failure to do so will result in the pedal set not being recognized as a high-precision T-
LCM Pedals pedal set.