manualshive.com logo in svg

Thrane&Thrane TT-3670A, User Manual

Share
Download
Thrane&Thrane TT-3670A User Manual Download Page 56

Chapter 3:  Operating the IP Handset

The menu system

45

3333

O

p

er

at

ing the 

IP

H

a

nd

se

t

Display

To change the display settings, do as follows:

1. From the 

Settings

 menu, select 

Display

.

2. Move to the setting you want to change.

3. For the backlight settings, use the keys   

and    to change the percentage.

Standby backlight can be set to maximum 
50%, and the Standby backlight cannot 
be set higher than the Active backlight.

4. For the remaining settings, select 

Edit

 to 

check/uncheck the box.

The backlight is on for 15 seconds after the 
last key press.

The screensaver is activated 1 minute after the last key press.

Web server

To enable or disable the built-in web server of the handset, do as follows:

1. From the 

Settings

 menu, select 

Web 

server

.

2. Select 

Edit

 to enable or disable the web 

server. The default settings is enabled 
(checked).

For information on the web server, see Using 
the web server on page 55.

Summary of Contents for TT-3670A






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands