manualshive.com logo in svg

Thrane&Thrane TT-3670A, User Manual

Share
Download
Thrane&Thrane TT-3670A User Manual Download Page 4

iii

Safety Summary

1

The following general safety precautions must be observed during all 
phases of operation, service and repair of this equipment. Failure to comply 
with these precautions or with specific warnings elsewhere in this manual 
violates safety standards of design, manufacture and intended use of the 
equipment. Thrane & Thrane A/S assumes no liability for the customer's 
failure to comply with these requirements.

DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE

Do not operate the IP Handset in the presence of flammable gases or fumes. 
Operation of any electrical equipment in such an environment constitutes a 
definite safety hazard.

KEEP AWAY FROM LIVE CIRCUITS

Operating personnel must not remove equipment covers. Component 
replacement and internal adjustment must be made by qualified 
maintenance personnel. Do not replace components with the cable 
connected. Always disconnect power and discharge circuits before touching 
them.

Summary of Contents for TT-3670A






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands