Thrane&Thrane TT-3670A User Manual Download Page 32

Page: 32 / 93

Chapter 2: Getting started

The handset keypad and display

2222

Gett

ing s

tar

BGAN signal status

When the IP Handset is connected to a BGAN terminal, the display shows the
signal strength of the BGAN signal.

Time

The display shows the time of day.

The format is selectable in the

Settings > Date and time

menu.

General indications

General indications are icons that show dynamic information such as missed
calls, sounds off, keypad locked and microphone muted.

For explanations of the icons, see Icons in the display on page 22.

IP Handset call status

This field shows handset status such as whether or not the handset is ready for
making calls, or whether there is an ongoing call.

For explanations of the icons, see Icons in the display on page 22.

Main display area

The main display area primarily displays the menus and messages to the user.

Action texts area

The action texts are used to indicate an action that takes place when the
corresponding key is pressed. The corresponding key is the key directly below
the text (left select, center select or right select).

Summary of Contents for TT-3670A






























































































Search results

Summary of Contents for TT-3670A

Reviews:

Related manuals for TT-3670A

Brands by name

Popular brands

Thrane&Thrane TT-3670A, User Manual

Search results

Summary of Contents for TT-3670A

Reviews:

Related manuals for TT-3670A

Brands by name

Popular brands