Chapter 3: Operating the IP Handset
44
The menu system
Cradle
You can select whether the handset should detect the cradle or not. Do as
follows:
1. From the
Settings
menu, select
Cradle
.
2. To have the handset detect whether or
not it is in the cradle, check the box.
This is the default mode. The function is
as follows:
•
You can answer calls by removing
the handset from the cradle, and
terminate a call by putting the
handset back in the cradle.
•
The handset automatically changes
to hands-free when you make or
answer a call with the handset in the
cradle.
•
If you take the handset from the cradle during the call, it automatically
changes back to hand-held.
•
In hand-held mode, when you put the handset in the cradle, the call is
terminated.
•
In hands-free mode, when you put the handset in the cradle the call is
not affected.
3. To make the handset independent of the cradle, uncheck the box.
This means you must always use
or
#
and
to start and end calls,
and you can only enable or disable hands-free operation by using the
keypad.
Summary of Contents for TT-3670A
