Thrane&Thrane sailor 6217 User And Installation Manual Download Page 71

Page: 71 / 102

Chapter 3: Installation

Power, VHF antenna and external equipment

33333

Installation

The following sentences are supported:

•

FSI: All fields are decoded.

•

GGA: UTC, "Position", "quality indicator" (indicators 1-5). All other fields are
unused.

•

GLL: UTC, "Position", "Status" and "mode" (indicators A and D). All other
fields are unused.

•

GNS: UTC, "Position" and "mode" (indicators A and D). All other fields are
unused.

•

RMC: UTC, "Position", "Status", "Date" and "mode" (indicators A and D). All
other fields are unused.

•

ZDA: UTC, "Day", "Month", and "Year". All other fields are unused.

In accordance with the standard EN61162-1:2008 and EN61162-2:1998

Received NMEA sentences except for FSI can be forwarded to NMEA output. As
talker the sentences are streamed when received (with no intervals).
HW revision: 57-127368-D.02
SW revision: 2.00.01

Summary of Contents for sailor 6217







































































































Search results

Summary of Contents for sailor 6217

Reviews:

Related manuals for sailor 6217

Brands by name

Popular brands

Thrane&Thrane sailor 6217, User And Installation Manual

Search results

Summary of Contents for sailor 6217

Reviews:

Related manuals for sailor 6217

Brands by name

Popular brands