Thrane&Thrane sailor 6217 User And Installation Manual Download Page 10

Page: 10 / 102

Chapter 1: Introduction

VHF radio and AIS receiver

Controls on the front plate

1. Loudspeaker.

2. Four soft keys with function title in the display.

3. Quick selection key for channel 16 and the programmed call channel.

4. Large display.

5. Connector for Handmicrophone or handset. If not used, put the cap from

the ACC connector on the front connector to prevent water ingress.

6. Squelch control to mute background noise.

7. Replay button to play back up to 90 s voice message.

8. Volume wheel knob with key-press function for volume control and power

on/off.

9. Selector wheel knob with key-press function for changing the working

channel, navigating in menus in the display and backlight dimming.

Summary of Contents for sailor 6217







































































































Search results

Summary of Contents for sailor 6217

Reviews:

Related manuals for sailor 6217

Brands by name

Popular brands

Thrane&Thrane sailor 6217, User And Installation Manual

Search results

Summary of Contents for sailor 6217

Reviews:

Related manuals for sailor 6217

Brands by name

Popular brands