Chapter 2: Operation
48
Replay function
Replay function
Replay allows the operator to playback received voice messages in the
loudspeaker.
Recording is activated automatically when a signal is received. Recording is
not possible during playback. Up to 60 tracks or 90 seconds can be handled.
The recorded channel is displayed. The message length is shown in seconds.
The display shows how old the message is. If the 90 s storage limit is reached,
the oldest data is overwritten.
Replaying recorded messages
To replay a message do as follows:
1. Press the Replay button (short press). The latest message
(message) is repeated. Information about this message is
shown in the display.
2. To stop replaying the message press the soft key
STOP
.
3. To play the current message again from the start press the Replay button
(short press).
4. To track back the series of messages double-press the Replay button (short
press) until the desired track is shown. The selected track is played.
5. To track back in time press and hold the Replay button until the desired
point in time. All messages up to the newest will be played.
