16
7.4) ERRORS:
these appear during operation, combined with a beep and fl ashing LED Worklights,
to notify the operator of procedural or operational errors.
Message
Error description
Solution
ERROR
Ï
Ð
The pressure release button (2) was
pressed before the control parameters
were reached (Force/Pressure).
Repeat the work cycle and wait for the motor
to stop automatically.
001
Ï
Ð
Abnormal power consumption of the
motor for more than 3 seconds.
The tool stops.
Wait for the display to turn off (60 sec.) or
remove and re-insert the battery, then re-
start the tool.
If the error occurs frequently, contact
Cembre.
002
Ï
Ð
Output voltage of the pressure trans-
mitter is out of the pre-set range.
Repeat the work cycle; if the errors
reoccurs frequently, contact Cembre.
003
Ï
Ð
Failure to reach the set pressure within
30 seconds of continuous operation of
the machine.
Repeat the work cycle; if the errors
reoccurs frequently, contact Cembre.
004
Ï
Ð
Overcharging of the battery with
protection tripping.
The tool stops.
Wait for the display to turn off (60 sec.) or
remove and re-insert the battery, then re-
start the tool.
If the error occurs frequently, contact
Cembre.
Errors are displayed for about 30 seconds before being reset, but will display repeatedly in
the event of permanent anomalies.
8. CONNECTION TO COMPUTER
The memory card integrated in the tool records operating data from 200.000 cycles for transfer via
the USB cable supplied.
To view and manage this data, go to
www.cembre.com
and register in the dedicated area, then
download the free
Cembre
software
CEM_SWBT01
.
Keeping the Firmware of the tool updated, via free of charge download from here, will optimise
the tool's performance.
9. RETURN TO
Cembre
FOR OVERHAUL
In the case of a breakdown, contact your local Agent who will advise you on the problem and give
you the necessary instructions on how to dispatch the tool to our nearest service Centre; if possible,
attach a copy of the
Cembre
Test Certifi cate supplied with the tool or, if no other references are
available, indicate the approximate purchase date and the tool serial number.
