SS-OCT System Base Unit
Chapter 1: Introduction
Rev A, December 17, 2018
Page 1
Chapter 1
Introduction
ATTENTION
Please read the instruction manual carefully before operating the SS-OCT system. All
statements regarding safety and technical specifications will only apply when the unit is
operated correctly.
This equipment is intended for laboratory use only and is not certified for medical applications,
including but not limited to life support situations.
Refer to this manual whenever the following symbols are encountered on the SS-OCT system:
Attention symbol indicates that additional information is given in this manual.
Laser Safety symbol indicates that laser radiation is present.
Shock Warning symbol indicates there is possible danger of injury to users.
ATTENTION
Check the supply voltage of the system before plugging in the computer. Make sure the included
power cords for the base unit, computer, and monitor are connected to a properly grounded
outlet (100 – 240 VAC; 50 – 60 Hz).
Transportation and delivery may cause the SS-OCT system to be warm or cool upon receipt.
Please wait for the system to reach room temperature before attempting to operate.
Operate this system on a flat, dry, and stable surface only.
WARRANTY WARNING
Do not open the base unit, imaging scanner or PC. There are no user serviceable parts in this
product. Opening the device will void your warranty. Any modification or servicing of this
system by unqualified personnel renders Thorlabs free of any liability. This device can only be
returned when packed into the complete original packaging, including all foam packing inserts.
If necessary, ask for replacement packaging.
The following symbols are used on the device:
"ON" (power)
"OFF" (power)
Stand-by
Protective earth; protective ground
