SS-OCT System Base Unit
Chapter 2: Setup
Page 8
MTN013142-D02
2.4. System Installation
ATTENTION
Make sure the included power cords for the base unit, computer and monitor are connected to a
properly grounded outlet (100 – 240 VAC; 50 – 60 Hz).
Transportation and delivery may cause the OCT system to be warm or cool upon receipt. Please
wait for the system to reach room temperature before attempting to operate.
Operate this system on a flat, dry, and stable surface only.
1)
Install the PC, monitor, mouse, and keyboard according to the documentation provided by the PC
manufacturer.
2)
If applicable, assemble the OCT-Stand as described in the documents provided in the OCT-Stand
box.
3)
If applicable, mount the scanner in the OCT-Stand by sliding the dove tail at the back of the scanner
into the dove tail slide of the OCT-Stand.
Figure 6
Mounting the Scanner into the Dove Tail Slide of the OCT-Stand
4)
Connect the power supply plug to the socket of the base unit and connect the other end to an
electrical outlet.
