THORLABS CLD101 Series Operation Manual Download Page 78

Page: 78 / 92

CLD101x

Type 2 - DFB Laser Diodes

Thermistor

N.C.

Thermistor

Laser Diode Anode

Laser Diode Cathode

N.C.

Photo Diode Anode

Laser Diode Anode

Photo Diode Cathode

TEC +

GND

TEC -

GND

Supported TO Can Pin Styles

Thorlabs TO can laser diodes are categorized in 8 pin styles, called A to H.

The CLD1010LP supports all pin styles with laser diode anode grounded or floating, these are the
pin styles A, D, E and G:

The CLD1011LP supports all pin styles with laser diode cathode grounded, these are the pin styles
B, C, and H:

Note

Above presentation is the bottom view to the laser. The pin style for each individual laser diode is
stated on the web site and in the individual Product Data Sheet, coming with the laser diode.

Summary of Contents for CLD101 Series




























































































Search results

Summary of Contents for CLD101 Series

Reviews:

Related manuals for CLD101 Series

Brands by name

Popular brands

THORLABS CLD101 Series, Operation Manual

Search results

Summary of Contents for CLD101 Series

Reviews:

Related manuals for CLD101 Series

Brands by name

Popular brands