THORLABS CLD101 Series, Operation Manual

Page: 50 / 92

© 2018 Thorlabs 48
CLD101x
5. *TST? – self-test query – run self test and read result
Use this query command to perform the instrument self-test routine. The command places the
coded result in the Output Queue. A returned value of zero (0) indicates that the test passed, other
values indicate that the test failed.
6. *WAI – wait-to-continue – wait until previous commands are completed
The *WAI command is a no operation command for the instrument and thus, does not need to be
used. It is there for conformance to IEEE488.2.
4.3.2 SCPI Command Reference
SYSTem subsystem commands
Command Description SCPI
SYSTem
Path to SYSTem subsystem.
R
:BEEPer
R
[:IMMediate] Issues an audible signal
R
:STATe {ON|1|OFF|0} Activates/deactivates the beeper
R
:STATe? Returns the state of the beeper
R
:VOLume <value> Sets the beeper volume
R
:VOLume? Returns the beeper volume
R
:ERRor
R
[:NEXT]?
Returns the latest error code and message
R
:MOUNt
[:TYPE]? Returns the mount type (<NR1>,description)
:VERSion? Returns level of SCPI standard (1999.0)
R
DISPlay subsystem commands
Command Description SCPI
DISPlay Path to DISPlay subsystem.
R
:BRIGhtness <value> Sets the display brightness
R
:BRIGhtness? Returns the display brightness value
R
:CALibration[:TOUCh][:INITiate] Initiates Touchscreen calibration
:FADeout
[:STATe] {ON|1|OFF|0}
Activates/deactivates automatic dimming
[:STATe]?
Returns the state of automatic dimming