THORLABS CLD101 Series, Operation Manual

Page: 19 / 92

© 2018 Thorlabs
2 Operation
17
2.4.3 Preparation
1. Check if the interlock jumper or an external emergency switch is installed to the I-LOCK
connector (5) , see section Interlock for details.
2. Insert the key into the lock (7) . For normal operation turn the key clockwise, this way
enabling the laser current output. In this position, the key cannot be removed.
3. Connect the power supply to the DC input (3) and switch the CLD101x on (1).
4. The CLD101x turns on and the boot screen appears for abt. 3 seconds. It displays basic
information.
CLD101x Boot Screen
During the boot process, a variety of hardware and software self tests are carried out. If any of
these test failed, an appropriate error message will be displayed in above screen. Please note
this error message and contact Thorlabs Tech Support.
5. Then the standard ("HOME") operation panel is displayed.
CLD101x Standard Operation Panel
If the Laser Current output is locked, lites up, if the interlock is open - .
7 23
7
7