THOR Jayco TALON 2021, Owner'S Manual

Page: 187 / 209

185
Section 12: Interior
Sleeper Sofa and Dinette
The sofa(s) in your recreation vehicle are designed to offer both ample seating and additional
sleeping capacity.
Convertible Sofa
Converting from sofa to bed
To convert the sofa into the bed position, pull forward on the top of the sofa back (A). As
the sofa back comes forward, grasp it at the bottom and rotate the seat back until it reverses
(B) and lays flat next to the sofa seat (C). Repeat this process on the sofa on the other side of
the vehicle. Set the sofa lock mechanism to the “LOCK” position. (See Power Bunk Bed
section for explanation of the sofa lock mechanism)
Converting from bed to sofa
Unlock the sofa lock mechanism to allow the bed to convert to a seat back. Reverse the
above process by lifting the front corner of the back cushion and rotating it until it reverses.
Continue to push on the sofa back until it is in the upright sofa position with the back of the
sofa against the wall. Both sections of the bed require this process.
Foldaway Sofa
Your recreational vehicle may be equipped with one of the following sofa styles which are
designed to offer both ample seating and additional sleeping capacity.
To convert the sofa (D) to the sleeper position (E) . Grasp the front corner of the sofa seat
(D–arrow ) and pull up and out away from the wall until the seat and the back cushion lay
flat (E). To reverse, pull up on the front corner of the seat, and as you pull up, push the seat
cushion in towards the wall. The small cushion rises to create the sofa back.
NOTE: Oil based soaps and cleaners are not recommended. No abrasive
cleaners or alcohol cleansers should be used. If other cleaner solutions are
used, first try on a spot in an inconspicuous area.
NOTE: The bed must be fully lowered to convert it into the sofa.