Thor Fiber 2018 Tel: (800) 521-8467 Email: [email protected] http://www.thorbroadcast.com
Figure-14
NOTE:
This IRD supports maximum 2 channels of analog stereo audios output simultaneously.
When the output has only one audio channel, users need to configure Primary Audio Chanel
(‘Audio 1 Mode’ and ‘Audio 1 Select’) only.
5.1 channel audio can only be resume via HDMI and SDI interfaces. When users choose
HDMI to SDI as the output interface and output 5.1 channel audio, users need to select ‘5.1
Channels’ under ‘Audio 1 Mode’ and set ‘Audio 2 Select’ off.
After finishing the configuration, click
to confirm.
Parameters → IP Stream:
This unit supports TS output in IP (1 MPTS & 8 SPTS). Click “IP Stream” and it displays the
interface where users can configure the MPTS & SPTS out parameters. (Figure-15)
It displays all the input
programs. Select one
program here to decode
and output.
To set the video and audio
parameters for the program
to be decoded
Primary Audio
Secondary Audio
