Thor Fiber 2018 Tel: (800) 521-8467 Email: [email protected] http://www.thorbroadcast.com
Figure-10
Output TS Mode:
ASI Output Select
: The TS content output through ASI is copied from the one of the IP streams
(MPTS and SPTS 1-8). Users can select one stream from the pull-down list.
After finishing the configuration, click
to confirm.
Parameters → Mux:
Click “Mux” and it displays the interface where users can multiplex programs and modify program
info. The selected programs will output in TS form through IP and ASI ports. (Figure-11)
Figure-11
Configure ‘Input Area’ and ‘Output Area’ with buttons in ‘Operation Area’. Instructions are as below:
: To enable/disable the CA filter
: To enable/disable the PID remapping
To refresh the input program information
To refresh the output program information
Under this mode, users can randomly select programs from any input channel to mux out.
To passthrough programs from Tuner 1/2
To passthrough programs from ASI
To passthrough programs from IP
Input Area
Output Area
Operation Area
