manualshive.com logo in svg

THOMSON TG797, Setup And User Manual

Share
Download
THOMSON TG797 Setup And User Manual Download Page 50

E-DOC-CTC-20080421-0018 v1.0

44

6

 Getting the Most Out of Your Thomson Gateway

6.1

Sharing Content on your Network

Introduction

The Thomson Gateway allows you to store your data on a centralised place in the network. This way you can 
share your files with everyone that is connected to your network.

What do I need?

A FAT32 formatted USB storage device.

Procedure

Proceed as follows:

1

Connecting your USB storage device to the Thomson Gateway

.

2

Configure Content Sharing on the Thomson Gateway

.

Connecting your USB storage device to the Thomson Gateway

Plug your USB memory stick or external hard disk in (one of) the USB master port(s) of your Thomson 
Gateway.

To format your device for FAT32, consult the help of your operating system. Make sure to make a 
copy of your data before you doing this. Formatting your device will erase all data.

If you need to remove your USB storage device from the Thomson Gateway, make sure to 
unmount it first. For more information, see 

“6.1.5 Safely Removing your USB Storage Device” on 

page 53

.

Summary of Contents for TG797

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands