THOMSON TG797 Setup And User Manual Download Page 14

Page: 14 / 88

E-DOC-CTC-20080421-0018 v1.0

Installation

1.3.1

Guided Installation

Connecting devices: wait!

Do not plug in any cables or connect any devices until you are prompted to do so by the wizard.

In case of problems

If you encounter problems during this installation please refer to

“8.1 Setup wizard Troubleshooting” on

page 74

Starting the wizard

To start the wizard:

Insert the Setup CD into your computer's CD- or DVD-ROM drive.

If your computer runs:

Microsoft Windows: The CD should autostart.

Mac OS X: Double-click

Menu

in the window with the content of the CD.

Select the language of your choice and click

The Setup wizard will now guide you through the installation.

At the end of the installation, following screen appears:

Select the

Go to the Thomson Gateway Web Interface

if you want to go to the

Thomson Gateway Web

Interface

after closing the wizard. On the

Thomson Gateway Web Interface

, you can further configure

your Thomson Gateway.

Click

Finish

The

CD menu

appears.

Summary of Contents for TG797
























































































Search results

Summary of Contents for TG797

Reviews:

Related manuals for TG797

Brands by name

Popular brands

THOMSON TG797, Setup And User Manual

Search results

Summary of Contents for TG797

Reviews:

Related manuals for TG797

Brands by name

Popular brands