6
6
Daily use
How to switch on the set?
With the On/Off-button fitted on the set.When the
red LED is lit, the TV set has previously been switched
on standby with the key
B
on the remote control.
If the red LED flashes, it means that the control
keyboard of the TV is locked and can only be made
operational again through the remote control.
In both cases, enter a channel number.
How to select a channel?
Through the digital keys of the remote control.
For two figure channels (10, 11, 12, etc.) press the 0
key on the remote control unite twice.
" --" appears on the screen.Through the digital keys,
enter the tens unit digit, then the unit one (you can
also quickly enter the two digits).
With the PR+ or PR- button of the remote control
or the keypad.
If you change the channel with the PR+ or PR- buttons
of the keypad, maintain the button pressed until the next
or preceding channel appears on the screen.
How to adjust the volume?
- With the remote control, by making short pulses
or maintaining the VOL+/- buttons pressed.
- With the keypad of the television, by maintaining
buttons VOL+/- pressed.
How to mute the sound?
With the (
) key.
Press once more on the key to reactivate the sound.
Operating the zoom:
Using the Left/Right directional keys, select:
- 4/3 format,
- 14/9 zoom (14/9 letterbox format),
- 16/9 zoom (16/9 letterbox format),
- 16/9 zoom subtitles (16/9 letterbox format –
subtitles),
- Cinerama zoom (optional),
- 16/9 format.
Zoom functions are only available on 16/9 TV sets.
How to display information?
With the INFO key, display the channel number, type
of sound and format and, if you want it, the time left
before programmed timer switch-off.
How to recall the preferred settings?
Press on the red key to recall the sound and
picture settings you previously stored (see page 5),
PREF is displayed at the bottom of the screen.
How to programme a switch-off?
Press on the Green (Z
Z
Z
/LIST), key, then using the
Left/Right keys, adjust on the screen the wished-for
duration before the switching-off of the TV set (by
intervals of 15 minutes up to 4 hours).
To exit the menu, press EXIT.
When the programmed remaining time is over, the
TV set will switch on standby
To cancel, first press the Green (Z
Z
Z
/LIST) and then, by
means of the directional key Left, reset the time
remaining on 00:00.The programmed switching-off is
also deactivated when the TV set is turned off through its
own On/Off switch.
How to prevent kids using the TV set?
Hold key
B
on the remote control down for over
5 seconds until the red LED on the TV set flashes.
The keys of the TV set are now locked and switching
it on again will be possible by means of the remote
control only.
Keep the remote control out of the reach of children.
To unlock the keys of the TV set, make use of the
number keys on the remote control.
How to switch off the set?
To switch the TV set off, press the key
B
on the
remote control or use the On/Off switch on the TV
set.
The TV set automatically switches to stand-by after a few
minutes without telecast on the selected channel.
Important:
The display Signal = 0 on the grey screen means that
you are on an AV programme and that the TV set is not
receiving any signal.
_en 23/01/04 13:21 Page 6
