4
4
About the TV set
Prior to enjoying your TV set, you’ll have to set it up,
i.e. to find and store the channels, which may be
received in your area.The Automatic Channel Set-up
will look for all the channels and number them.You
may change them upon completion of Automatic
Channel Set-up.
How to switch on the set?
With the On/Off-button fitted on the set.When the red
LED is lit, the TV set has previously been switched on
standby with the key
B
on the remote control.To switch
the TV set on again, type in a channel number.
Automatic Channel Set-up
Initial set-up.
• When a VCR or satellite receiver is connected to the
aerial socket, you must switch on this equipment. Should
external equipment be connected to the TV set via the
SCART socket, it must be turned off.
When you first switch on the TV the INSTALLATION
menu appears and the Language option is highlighted.
Select your language using the Left/Right buttons.
When you select a language it is applied to the menus
immediately.
Use the Up button to then select the Auto. option.
Press the ok key on the remote control unit to display
the AUTO. INSTALLATION menu.
The first line (Standard) is selected .
• Select the appropriate standard using the Left/Right
buttons:
EURO :Western Europe,Tunisia, Morocco,Australia,
New Zealand.
FR
: France, Luxemburg.
UK
: United Kingdom, Eire.
DK
:Eastern Europe, Middle East,Africa, French
DOM-TOM,Asia.
• Use the buttons Up/Down to then select the Start
option and press ok to start the search.
Start the Automatic Channel Set-up.
Two new lines appear showing the frequency and programme
number on which each new channel found is memorised.
Wait a few minutes until the ORGANISER menu
appears.
Channels Organisation
The PR line is selected.
How to change the channel number?
Use a TV programme magazine to help you identify the
channels.
1. Use the key PR+ and PR- to select the channel
number you wish to change.
2. Press the new channel number (compulsorily 2 digits,
for ex.: for Channel 2, enter 0, then 2) on the remote
control.You can also use the directional Left/Right keys.
3. Validate with key ok.
The corresponding programme is now stored under the
new channel number.
How to delete a channel number?
Delete any programme the picture quality of which
appears to be poor.
1. Select the channel with the key PR+ and PR-.
2. Select line
using the Up/Down directional keys.
3. Press and hold down the ok key: the channel is
deleted.
Prior to leaving the menu, you should check whether
the programmes are stored in the order you prefer.
Once your channels are duly sorted, close the menu
through EXIT.
Note: For channels diffusing teletext in Czech, Slovak,
Rumanian, Croat, Russian or Greek.
After having tuned in the channel, display the manual
channel set-up menu (see page 5).
- Select the Char.set line by pressing 5 times on the
Down button of the remote control.
- Select the number of the character table, using the
table on page 7.
- Select the PR line.
- Memorise it with ok and then quit the menu with EXIT.
Subsequent set-ups:
To proceed with a new Automatic Channels set-up, press
the MENU key of the remote control :
- twice for mono TVs,
- three times for stereo TVs.
The INSTALLATION menu appears and the Auto.
option is highlighted.
Press the ok button to display the
AUTO. INSTALLATION menu.
_en 23/01/04 13:21 Page 4
