THOMSON grass valley XtenDD, Manual

Page: 208 / 250

7. Installing External Devices
7 - 36 Planning and Installation - Rev. 0 / 04.2002
7.1.5.8 Control Cable Connections
Connect the AUX connector on the rear panel of the DME-7000 processor to one
of the RS422-ports of the
mainframe (ports 1...10). A standard RS422
cable is required (1:1).
7.1.5.9 Setup and port configuration
DME-7000
D
In the DME SETUP menu (page #700) press the required function key to select
the OPERATION menu (page #702).
D
Select DME protocol for the SW’er Port
Select the DVE filecard in the INSTALL/E-BOX menu. Setup the following items:
D
Video Send: setup aux bus no. according to video cabling (aux bus
# feeding the DME video input)
D
Key Send: setup aux bus no. according to video cabling (aux bus
# feeding the DME key input)
D
Control Port: Setup the port number (1...10) to which the DME unit
(’AUX’ port) is connected to.
D
Control Type: Select the ‘sony_dme_vXXX’ protocol (‘XXX’ is the
version designator)
D
Control Delay: 0 (default)
7.1.6 OPERATION
Video/Key Bus Source selection:
Menu #51 - IN/OUT SELECTOR
D
Front Video Select the channel (0 ..63)
D
Front Key Select the channel (0 ..63)
D
Back Video Select the channel (0 ..63)
D
Back Key Select the channel (0 ..63)
Background Source selection:
Menu #711 - SOURCE SELECTOR
D
Select SWITCHER as Source Selector
D
Select External Video (1..16)