THOMSON grass valley XtenDD, Manual

Page: 169 / 250

6. Installing System Accessories
6 - 31 Planning and Installation - Rev. 0 / 04.2002
6.3.4 OPERATING HINTS
Please note the following display modes:
8-digit source name preset in the respective menu. If ”Name Transfer” is selected,
the display shows the 4-digit source names.
I N P U T 1 0
The display will give all information about the video components on the output.
F T B
The output is in Fade To Black mode.
I N P U T 1 0
If the output shows the transparent input 10:
The input name will be shown (see Inputs).
B G N D - 2 3
⇑
character is blinking
“BGND” will be shown in the first 4 digits of the display whenever the video back-
ground is in transition state. Keyers 1-3 will be represented by the characters ‘1’,’2’
and ‘3’ in the last three digits of the display.The position in the last three digits will
indicate the priority of the keyers. A keyer component amount less than 100% will
be shown by a blinking number.
With this display the background is in transition state, the keyer 2 (lowest priority)
is in transition state, the keyer 1 is off and the keyer 3 (highest priority) is on.
B _ _ _ 2 _ A _
⇑
character is blinking
The ME is switched to the layered mode. Layer B is ON (lowest priority), layer 2 is
in transition state (2nd priority), layer A is ON (highest priority), layer 1 is OFF.
Inputs
INPUT 1 ... 48
Main Output
MAIN OUT