THOMSON grass valley XtenDD, Manual

Page: 180 / 250

7. Installing External Devices
7 - 8 Planning and Installation - Rev. 0 / 04.2002
7.1.1.7 Setup and Port Configuration of the
The operation “DVE Effect Loop” and the “Aux Bus control” requires in the
switcher the following settings (for each DVE No .):
Menu: INSTALL / E-BOX / DVE
In the DVE menu the following settings have to be carried out:
DVE No.: 1 and/or 2
Port (RS232): 11 to 14 (recommended 11 or 12 )
Type: dveous
Video In / Key In: Enter Video and Key inputs on which the
transformed signal of the DVE is available.
Delay: Adjust the delay of the switching point in field.
Tally: Int/Ext Internal / external (“intelligent”) tally control of the
DVEous can be used for A/B switching. In position
Ext , the DVEous determines also which input
source will get the red tally in dependence on the
effect.
Video Send / Key Send: Select the Aux Busses as source for Video and
Key.
Control Port: RS 422 port (control cable)
Control Type: GVG 200/dd3x_dveous
Control Delay: Adjust the delay of the switching point between
the AUX ports for the frontside and backside in
field.