80
KAM-HD-MULTI—Instruction Manual
Kameleon HD Links and Web Pages
Output Processing
Set the output processing for each channel (A and B) for each Audio Pair
(Pair 1-4) with the Processing pulldown to one of the following output con-
ditions:
•
In1 - selects the audio present on In1 as the channel output.
•
-In1 - inverts the audio present on In1 as the channel output.
•
In2 - selects the audio present on In2 as the channel output.
•
-In2 - inverts the audio present on In2 as the channel output.
•
In1+In2 - audio present on In1 and In2 are added together as the
channel output.
•
-(In1+In2) - audio present on In1 and In2 are added together then
inverted as the channel output.
•
In1-In2 - audio present on In 2 is subtracted from audio on In1 as the
channel output.
•
-(In1-In2) - audio present on In 2 is subtracted from audio on In1 then
inverted as the channel output.
•
1 kHz - places a 1kHz tone on the channel output.
•
400 Hz - places a 400 Hz test tone on the channel output.
•
Silence - forces the channel output to silence.
•
ID - identifies channel A and B (left/right ID) with a 1 kHz tone at a
-20 dBFS level that switches between Channel A and Channel B with a
repeating cadence of 1 second on Channel A (left) followed by a 3
second tone on Channel B. Each pair from 1-4 is indicated by that
number of bursts of 400 Hz at an 8 Hz rate when the 1 kHz tone starts
on a new channel.
