KAM-HD-MULTI—Instruction Manual
11
Installation
Installation
Installation of the Kameleon HD module is a process of:
•
Placing the dual-height KAM-HD-MULTI-UR or KAM-HD-MULTI-BR
rear module in a rear frame slot (no other rear modules can be used),
•
Placing the media module in the corresponding front slot, and
•
Cabling and terminating signal ports.
The Kameleon HD module can be plugged in and removed from a 2000
Series frame with power on. When power is applied to the module, LED
indicators reflect the initialization process (see
Note
The Kameleon HD must be installed in a 2000T1DNG or 2000T3NG frame
(2000NET and 2000GEN module installed) for access to a frame reference.
Module Placement in the 2000 Frame
There are twelve slot locations in both the front and rear of a Kameleon
3 RU frame to accommodate Kameleon HD modules. The
KAM-HD-MULTI module requires a dual height rear module, either the
KAM-HD-MULTI-UR or the KAM-HD-MULTI-BR, that uses two rear
module slots allowing up to 4 modules per 3 RU frame, 2 in a 1 RU frame.
Dual-height modules can be placed in any rear slot as long as there is room
in the frame.
To install a Kameleon HD module set in a 2000 Series frame:
1.
Locate a vacant slot in the rear of the 3 RU frame (
).
Figure 1. 2000T3NG Frame, Rear View
Media section
rear slots 1-6
(with one 2000EMI blank)
Media section
rear slots 7-12
Network
and reference
input connections
Power, frame
configuration,
& frame health
connections
8341_12r2
