SECTION 2
THS 2000 SOFTWARE PROGRAM
PM055 Rev 2 00/08/31
Thomson Technology
20
2.4.
Step 4: Enter Site Properties
Once the connection method is established, you will be prompted for the site properties,
such as site name, as shown below. This allows you to enter the first site in the site-list.
The name and password fields correspond to the name and password already
programmed into the CIM that is managing the remote site. The description field is
optional and can be used to describe the site. The phone number is entered for a remote
site.
The name and password parameters must match the CIM on the intended site. The
default name is "site" and the default password is "user." These parameters are case
insensitive.
See
Site Properties
.
2.5.
Step 5: Connect To Site
The next dialog box displays the list of sites, as shown below. At this point, there is only
one site and it’s already selected. From this dialog you can add, remove and modify site
properties; modify the connection method; and connect to the selected site.
