8
First issue 09 /03
Y DRIVE Assembly
1 Remove the three screws.
fig. 8
2 Loosen the Rivet.
fig. 8
3 Remove the Lead Cover.
fig. 8
4 Pull out the Flexible Cable.
fig. 8
5 Detach the lower part of the Front Case 50 so that it can swing open hinged at the top.
fig. 9
6 Remove the Front Case 50.
fig. 9
7 Remove the Rear Case (50M). (Screws x 20)
fig. 1
8 Remove the Y DRIVE Assy. (Connectors, Screws x 8)
fig. 10
X DRIVE Assembly
1 Remove the Rear Case (50M). (Screws x 20)
fig. 1
2 Remove the X DRIVE Assy. (Connectors, Screws x 8)
fig. 11
2
3
Turn the Rivet, taking care not to push
on it, because pushing on it may set
the Rivet to its original position.
Remove the Lead Cover together
with the Rivet when the Rivet is fully
loosened.
Rivet
1
Front Case 50
Lead Cover
Lead Cover
SIDE KEY
Assy
4
4
5
6
Front Case 50
Aluminum
Materials
The hook of the Front Case 50 is
fixed with the Rear Case (50M) and
the aluminum material, as shown in
the illustration.
Rear Case
(50M)
8
8
8
8
Y DRIVE Assy
8
2
2
X DRIVE Assy
2
2
fig. 8
fig. 9
fig. 10
fig. 11