Thomas SAF-T-LINER C2, Maintenance Manual

Page: 41 / 176

3. Carefully remove the large outer filter element
from the filter cannister, as shown in
Fig. 24 , and
discard the outer filter element.
4. Remove the small inner filter element from the
filter cannister, as shown in
Fig. 25 , and discard
the inner filter element.
5. Install a new inner filter element in the filter can-
nister. Ensure that the element is fully seated.
f130183 06/04/2020
1
2
1. O-Ring 2. Filter
Fig. 12, Installing the Filter Element in the Housing
f130185 06/05/2020
1
1. Separator Housing (first section)
Fig. 13, Installing the First Section of the Separator
Housing
f130186 06/05/2020
Fig. 14, New O-Ring Installed on the End Cap
f130187 06/05/2020
Six end cap bolts are used to attach the end cap to the
compressor. Only three of the bolts are shown.
Fig. 15, Installing the End Cap
Air Compressor
13
Saf-T-Liner C2 School Bus Maintenance Manual, May 2021
13/5