3
Table of Contents
Elastimold
®
.73.PMEFE7BDVVN3FDMPTFST
SECTION 1: Overview
Introduction ..........................................................................2–3
Ordering Information ................................................................4
Ratings and Specifications .......................................................4
SECTION 2: Instruction Manual and Drawings
Elastimold
®
MVR Single-Phase and Three-Phase
Instruction Manual .............................................................5–12
Safety Instructions.............................................................5
Acceptance and Inspection ................................................6
Lifting ...............................................................................6
Set-Up and Mounting ....................................................7–9
Voltage Sensor Set-Up ....................................................10
Grounding and Testing ..............................................10–11
Operation and Maintenance .............................................12
Outline Drawings ..............................................................13–20
Single-Phase 15/27kV – 3188C0110 .........................13–14
Single-Phase 38kV – 3188C0111 ..............................15–16
Three-Phase 15/27kV – 3188C0112 .........................17–18
Three-Phase 38kV – 3188C0113 ..............................19–20
Schematic Drawings ........................................................21–23
Single-Phase 15/27/38kV – 3188C0115 .........................21
Three-Phase 15/27/38kV – 3118C0114 ..........................22
Power Module (for use with SEL
®
351R) – 3118C0116 ....23
SECTION 3: Design Test Data
Elastimold
®
MVR Test Data Summary .....................................24
Description
of Operation
The single-phase Elastimold
®
MVR is controlled and
operated by the SEL
®
351RS Kestrel control via a 10-pin
interconnecting cable. The three-phase Elastimold
®
MVR
can be controlled either directly with the SEL
®
651Rx2
control via a 32-pin interconnecting cable or by a SEL
®
351R or 351R Falcon control via a 14-pin cable connected
to an MVR power module, which then connects to the
recloser. This manual will cover the set-up and installation
of your new Elastimold
®
MVR Recloser. For information
on SEL
®
controls and their operation, please refer to
their respective manuals.
SEL is a registered trademark of Schweitzer Engineering Laboratories, Inc.
