*4t*4.73
Section
3:
Design
Test
Data
Please ask your Thomas & Betts sales representative for a complete catalog of quality
Thomas & Betts electrical products or visit us at
XXXUOCDPN
. For customer service,
call
1-800-326-5282
. For technical questions, call
1-855-862-1800
.
© 2013 Thomas & Betts Corporation. All rights reserved. Printed in the U.S.A.
01/13/1M Rev. 1 IS-1335
Thomas & Betts Corporation
Electrical Division
8155 T&B Boulevard
Memphis, TN 38125
901-252-5000
www.tnb.com
Elastimold
®
MVR Test Data Summary
Elastimold
®
MVRs are tested under the requirements of ANSI
C37.60-2003.
L7BOEL7.73T
are certified as single-phase devices
and are capable of single-phase tripping on all grounded and
ungrounded circuits within their respective rated maximum
voltages (17.1kV for 15kV units
and 29.3kV for 27kV units).
L7.73T
are certified for use
as a single-phase device capable
of single-phase tripping on
grounded circuits and as a
three-phase device capable
of three-phase tripping only
on ungrounded circuits.
The table below highlights the
testing covered in Elastimold
®
Test Report # 372-17-12010.
Test Report 372-17-12010
C37.60-2003
Standard Clause & Description
15kV MVR
Compliance
27kV MVR
Compliance
38kV MVR
Compliance
6.2
Insulation (Dielectric) Tests
6.3
Switching Tests
6.4
Making Current Capability
6.5
Operating Duty Tests
6.6
Minimum Tripping Current Tests
6.7
Partial Discharge (Corona) Tests
6.10
Temperature Rise Tests
6.11
Time-Current Tests
6.12
Mechanical Duty Tests
6.13
Surge Withstand Capability (SWC) Tests
Other Testing
UV/Weathering Tests
Other Testing
IEC 62217 – Salt Fog Spray Test (1,600 hrs.)
