thomann Stairville Stage Flood Inst QCL 24x10W, User Manual

Page: 33 / 64

For DMX operation, you have to set the number of the first DMX channel to be used by the
device (DMX address).
Press
[MENU] to enter the main menu and then [UP] or [DOWN] until the display shows ‘DMX
Address’ . Press [ENTER] .
Use [UP] and [DOWN] to select a value between 1 and 512 (display shows ‘DMX Addr: 001’ …
‘DMX Addr: 512’ ).
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible first DMX address for the various DMX modes.
Mode Highest possible first DMX address
3-channel 510
4-channel 509
5-channel 508
6-channel 507
11-channel 502
DMX address
Operating
Stage Flood Inst QCL 24x10W
33