thomann Stairville Stage Flood Inst QCL 24x10W, User Manual

Page: 36 / 64

These submenus are used to adjust the system settings.
Press
[MENU] to enter the main menu and then [UP] or [DOWN] until the display shows ‘SET’ .
Press [ENTER] .
Select one of the following submenus:
n ‘UPLD’ :
This one starts the upload (copying from the Master unit into the Slave units) of the pre‐
programmed automatic programmes. Password entry is necessary. To do so, press [UP] +
[DOWN] + [UP] + [DOWN] in sequence and then [ENTER] .
The Slave units signalise the upload progress:
– yellow light: upload in process
– red light: an error occurred
– green light: upload successful
n
‘REST’ :
This one resets to defaults. Password entry is necessary. To do so, press [UP] + [DOWN] + [UP]
+ [DOWN] in sequence and then [ENTER] .
n
‘Id’ :
This one is used to enable ( ‘on’ ) or disable ( ‘oFF’ ) the usage of the ID addressing via DMX
controller.
n
‘REGW’ :
Settings
Operating
LED floodlight
36