thomann Stairville Stage Flood Inst QCL 24x10W User Manual Download Page 11

Page: 11 / 64

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not

within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from

the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.

DANGER!
Hazardous voltage
The wiring, as well as all maintenance and repair work on the electrical installa‐

tion of the device must only be performed by qualified electrical personnel.

Failure to do so may result in electric shock and risk of fire and loss of life.
Before starting work on the electrical installation, the device must be turned volt-

free.

Safety

Safety instructions

Stage Flood Inst QCL 24x10W

Summary of Contents for Stairville Stage Flood Inst QCL 24x10W

































































Search results

Summary of Contents for Stairville Stage Flood Inst QCL 24x10W

Reviews:

Related manuals for Stairville Stage Flood Inst QCL 24x10W

Brands by name

Popular brands

thomann Stairville Stage Flood Inst QCL 24x10W, User Manual

Search results

Summary of Contents for Stairville Stage Flood Inst QCL 24x10W

Reviews:

Related manuals for Stairville Stage Flood Inst QCL 24x10W

Brands by name

Popular brands