thomann Stairville Stage Flood Inst QCL 24x10W, User Manual

Page: 37 / 64

This one determines, whether the white colour is defined by RGB=255.255.255 ( ‘Yes’ ), or is
manually defined via the CAL2 menu ( ‘No’ ).
n ‘dim’ :
This one determines the dimmer mode or the speeds:
– Setting
‘oFF’ : Changes of dimmer and RGBW are done linearly.
– Settings ‘dim1’ , ‘dim2’ , ‘dim3’ ‘dim4’ : Speed modes for the non-linear dimmer; ‘dim1’
is the fastest, ‘dim4’ is the slowest.
11 different preprogrammed values for colour temperature ‘White’ can be edited.
Press
[MENU] to enter the main menu and then [UP] or [DOWN] until the display shows ‘CAL1
white’ . Press [ENTER] .
With [UP] and [DOWN] you can now call up one of the 11 predefined settings for ‘White’
( ‘WT01’ … ‘WT11’ ).
Press [ENTER] , then you can change the following values:
n
R: intensity red, value range is between ‘000’ and ‘255’
n
G: intensity green, value range is between ‘000’ and ‘255’
n
b: intensity blue, value range is between ‘000’ and ‘255’
n
W: intensity white, value range is between ‘000’ and ‘255’
Setting colour temperature for
‘White’
Operating
Stage Flood Inst QCL 24x10W
37