7
Operating
7.1 Starting the device
Connect the device to the power supply to start operation. After a few seconds, the display
indicates that a reset is in progress. The device is then ready for use. The display shows the
operating mode that was selected when the unit was last powered off.
7.2 Main menu
Press
[Mode]
to activate the main menu and select an operating mode. Use
[Setup]
to select
further options. Use
[Up]
and
[Down]
to change the respectively displayed value. The unit
instantly applies the displayed value, you don't need to push a button for confirmation.
If you don't press any button for about ten seconds the display turns off. It will be reactivated
to display the previously shown menu by pressing any button.
The set values are retained even when the device is disconnected from the mains power
supply. To delete all settings made by you, follow the notes in chapter .
Operating
LED Matrix Blinder 5x5 DMX
27
Summary of Contents for StairVille LED Matrix Blinder 5x5 DMX
