thomann StairVille LED Matrix Blinder 5x5 DMX, User Manual

Page: 20 / 52

If the unit is properly connected to a turned on DMX controller, the first position of the display
is flashing in DMX mode. If not, the device is not receiving a valid DMX signal.
When you configure a group of devices in master/slave mode, the first unit will control the
other units for an automatic, sound-activated, synchronized show. This function is ideal when
you want to start a show immediately. Connect the DMX output of the master device to the
DMX input of the first slave device. Then connect the DMX output of the first slave device to
the DMX input of the second slave device and so on.
DMX indicator
Connections in master/slave
mode
Starting up
blinder
20