28
[PROGRAM]
Button for setting the Programme mode. Press
[PROGRAM]
to go from work mode to edit mode and back to work mode.
29
[BLACKOUT]
Button to activate the blackout
30
[ON / OFF]
Switch to turn the device on or off.
31
[POWER IN]
Connect the IEC chassis connector with fuse holder via the supplied power cord to an AC outlet that provides the
voltage specified in the Technical Data.
32
[ACT / LINK]
ACT: LED lights on network activity
LINK: LED lights up on Ethernet connection to a signal source
33
[Ethernet]
Ethernet socket for connecting a data cable
34, 34
[DMX OUT A]
/
[DMX OUT B]
These two terminals send DMX signals to DMX capable devices. Use a cable with 3-pin XLR connectors to connect
the devices.
36
[MIDI IN ]
The device receives MIDI data via the "MIDI IN" socket.
37
[MIDI OUT]
The device sends MIDI data via the "MIDI OUT" socket.
38
[MIDI THR]
The "MIDI THRU" socket will forward the incoming MIDI data to the next MIDI device.
Rear panel
Connections and operating elements
DMX controller
16
Summary of Contents for Stairville DMX Invader 1024 NET
