thomann Stairville DMX Invader 1024 NET, User Manual

Page: 28 / 40

6.5 Macros
6.5.1 Recording a macro
The individual combinations of manual settings, scenes, chasers and shapes can be
stored together in macros. The device can record 31 macros that are accessed via the
buttons.
1.
Press [PROGRAM] to enter the edit mode.
ð
The [PROGRAM] LED flashes.
2. Press [MACRO] .
3.
Use the number buttons [1 … 31] to assign a number to the macro.
ð
The device will now record all subsequent steps. At this, manual settings,
scene settings and chaser settings can be combined.
4. To exit Edit mode, press [PROGRAM] .
6.5.2 Executing a macro
1.
Press [MACRO] .
2. Press the number buttons [1 … 31] twice with the number of the macro you
want to play.
ð
The macro is being executed.
6.6 Enabling programme run
6.6.1 Playing scenes
Scenes can be played individually or as a sequence of multiple scenes. To start a
sequence of multiple scenes, all scenes must be in the same group (A) or (B).
1.
Press [SCENE (A)] or [SCENE (B)] .
2. Press [TYPE] until either the [Latch] LED or the [Swop] LED lights up.
In Latch mode (Toggle) several scenes can be selected.
In Swop mode (Trigger) only one scene can be selected.
If neither of the two variants is activated, the flash mode is activated.
3. Select the desired scene or scenes using the number buttons [1 … 31] .
ð
The desired scene or scenes are being played.
Operating
DMX controller
28