manualshive.com logo in svg

thomann Stairville DMX Invader 1024 NET, User Manual

Share
Download
thomann Stairville DMX Invader 1024 NET User Manual Download Page 35

9 

Protecting the environment

For the transport and protective packaging, environmentally friendly materials have

been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make

sure that they are collected for recycling. Please follow the notes and markings on

the packaging.

This product is subject to the European Waste Electrical and Electronic Equipment

Directive (WEEE) in its currently valid version. Do not dispose with your normal

household waste.
Dispose of this device through an approved waste disposal firm or through your local

waste facility. When discarding the device, comply with the rules and regulations

that apply in your country. If in doubt, consult your local waste disposal facility.

Disposal of the packaging material

Disposal of your old device

Protecting the environment

 

 

DMX Invader 1024 NET

35

Summary of Contents for Stairville DMX Invader 1024 NET









































Reviews:

No comments

Brands by name

Popular brands

Load more brands