thomann Stairville DMX Invader 1024 NET, User Manual

Page: 29 / 40

6.6.2 Playing a Chaser
1.
Press [CHASE (A)] or [CHASE (B)] .
2.
Press [TYPE] until either the [Latch] LED or the [Swop] LED lights up.
In Latch mode several chases can be selected.
In Swop mode, only one chase can be selected.
3.
Select the desired chase or chases using the number buttons [1 … 31] .
ð
The desired chase or chases are being played.
If the number of chases to be played at the same time exceeds the permis‐
sible number, the message ‘Chase over load!’ appears in the display.
If several chases are played simultaneously, the display shows the settings
of the last chase in the sequence.
6.6.3 Changing the fade mode for chasers
Chasers can be played with two fade modes:
n
In the default setting ‘Only x/y’ only the X and Y channels can be assigned a fade
effect, all other channels have no fade effect.
n
In the setting ‘All channel’ , all channels can be assigned a fade effect.
1. Press [PROGRAM] for about 3 seconds.
ð
The fade effect is switched.
2.
Release [PROGRAM] .
ð
The new setting is active.
6.6.4 Setting up triggers for chasers
There are three types of triggers for chasers:
n
Auto: The speed of the chase is controlled by the timing of the scenes and the
Time fader.
n Swing: The speed of the Chase is controlled by the Swing button.
n
Music: The speed of the chase is controlled by the rhythm of the music.
Press [MODE] until the LED of the desired trigger lights up.
6.6.5 Setting up chaser speed
In Trigger mode ‘Auto’ , the running speed of the chase currently shown on the dis‐
play can be manually adjusted with the [TIME] slider.
Operating
DMX Invader 1024 NET
29