thomann STAIRVILLE CLB2.4, User Manual

Page: 34 / 64

A preprogrammed automatic show can only be activated when the unit is operating in stand-
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Press
[Mode] repeatedly until the display shows ‘Pr.xx’ . Now you can select one of the preprog‐
rammed automatic shows. Use [Up] and [Down] to select a value between ‘Pr.01’ and ‘Pr.14’ .
Settings for programme 01:
For programme Pr.01, you can set one of fourteen static colours across all LEDs. Press
[Mode ]
and use [Up ] and [Down ] to select a desired colour (see following table). After selection, press
again [Mode] to set the flash frequency. With [Up] and [Down] you can now select a value
between ‘FS.00’ (slow) and ‘FS.99’ (fast).
Colour Display
Cyan ‘9b’
Purple ‘rb’
Pink ‘rb’
Orange ‘r9’
Operating mode ‘Preprog‐
rammed automatic show’
Operating
LED lighting set
34