thomann STAIRVILLE CLB2.4, User Manual

Page: 40 / 64

The sound controlled automatic show can only be activated when the unit is operating in
stand alone mode or as master in a master / slave combination. This setting is only relevant if
the device is not controlled via DMX.
Press
[Mode] repeatedly until the display shows ‘Soud’ .
Press [Setup] and use [Up] and [Down] to adjust the sensitivity for the built-in microphone in a
range from ‘SO.00’ (low sensitivity) to ‘SO.31’ (high sensitivity).
Press [Setup] again and activate with [Up] and [Down] one of the programmed shows ‘SU.01’ to
‘SU.31’ .
Operating mode ‘Sound control’
Operating
LED lighting set
40