thomann STAIRVILLE CLB2.4, User Manual

Page: 39 / 64

A constant colour can only be activated when the unit is operating in stand-alone mode or as
master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
Press
[Mode] until the display shows ‘Colr’ . Press [Setup] . The display shows the setting for one
of the primary colours (display shows ‘r.xxx’ , ‘G.xxx’ or ‘b.xxx’ ). Press [Setup] to change the
colour.
Use
[Up] and [Down] to adjust the intensity of the colour:
Display Meaning
‘r.000’ … ‘r.255’ Red
‘g.000’ … ‘g.255’ Green
‘b.000’ … ‘b.255’ Blue
Operating mode ‘Dimmer’
Operating
CLB2.4 Compact LED PAR System
39