thomann STAIRVILLE CLB2.4, User Manual

Page: 36 / 64

Settings for programmes 02 to 14:
To adjust the programme speed, press again
[Setup] . The display shows ‘SP.xx’ . Now use [Up]
and [Down] to select a value between ‘SP.01’ (slow) and ‘SP.FL’ (fast).
To adjust the strobe frequency, press [Setup] again. The display shows ‘FS.xx’ . Now use [Up]
and [Down] to select a value between ‘FS.00’ (slow) and ‘FS.99’ (fast).
Automatic operation can only be activated when the unit is operating in stand alone mode or
as master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
Press
[Mode] repeatedly until the display shows ‘Auto’ . Playback of preprogrammed shows
Pr.02 … Pr.14 starts automatically.
This setting is only relevant if the device is serving as Slave in a Master / Slave configuration
and is not controlled via DMX.
Operating mode ‘Automatic’
Operating mode ‘Slave’
Operating
LED lighting set
36