6. Place the notched end of the new memory module toward the contact edge side of the memory slot,
and insert the memory module
1
into the slot at an angle of about 20 degrees. Pivot the memory
module downward until it snaps into place
2
. Ensure that the memory module is firmly installed in
the slot and cannot be moved easily.
Attention:
Do not touch the contact edge of the memory module. Otherwise the memory module
might be damaged.
Note:
If you install a memory module in only one of the two memory slots, install it in the bottom slot.
7. Reinstall the computer cover
1
. Then tighten the screws
2
.
8. Reinstall the battery. See “Replacing the battery” on page 71.
9. Turn the computer over again. Connect the ac power adapter and all cables.
Chapter 6
.
Replacing devices
101
Summary of Contents for Edge E440
