pg. 9
18
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
19
1
2
3
4
5
6
7
8
9
10
11
12
13
16
15
14
(3) (4) Auxiliary buttons for temperature setting
Press button 3 to lower the temperature. Press button 4 to raise the temperature level set in
Aladino. As is explained below they are only functional if the AUTO cycle is selected. The set
temperature appears in zone 9 of the display.
The room temperature, however, appears in zone 5 of the display. In this operating cycle the
ventilation and power self-regulate according to the set temperature and the temperature
detected in the display. It is not possible to set the air flow discharging from the heater at any
desired temperature because it is autonomously established by the heater according to the
ambient temperature. If the AUTO function is not activated the temperature value set with buttons
3 and 4 is ignored.
5.1.3
5.1.3
5.1.3
5.1.3
5.1.3
Indicators of the handheld radio control
Indicators of the handheld radio control
Indicators of the handheld radio control
Indicators of the handheld radio control
Indicators of the handheld radio control
(5) "Room temperature detected by the radio control's sensor indicator
(6) "Ventilation level" indicator
(7) “Combustion level” indicator
(8) "AUTO" CYCLE ACTIVE indicator
(9) “Room temperature setting" indicator : this is the room temperature that you wish to reach by means of buttons 3 and 4.
(10) Display zone where the following appear: operating phases, programming, MENU …
(11) Clock
(12) Day of the week
(13) Battery charge level
(14) “Chronothermostat enabled-disabled” indicator
(15) (16) On-off indicators for the programming phase
(17) Battery charger connection
(18) “Code selector” and “Battery compartment” cover
(19) “MENU” selection button To access the main menu press the button marked 19. Press button 19 repeatedly to scroll the
adjustment, setting and programming windows (see para. 5.2 , 5.3 , 5.4 , 5.5 , 5.6 , 5.7) . This button can also carry out DATA
ANALYSIS functions: fundamental control function for updating data.
After having carried out the DATA ANALYSIS all the data will be updated: it is normal for the temperature sensor to detect temperatures
which are slightly different to the real ones: variations caused by the environment in which the radio control is positioned.
To exit the main menu without having to scroll all the possible adjustments/ functions, simply press button (1) to return to the heater
operating status.
