pg. 10
-Adjust the heater mounting feet.
-Position the kickplates
(M)
(figure 5 and figure 6 ), then check that the door
(PC)
can be removed and if necessary raise the mounting feet, mount
the side with ceramic tiles by firstly inserting the bottom folds on the base and fastening with the 2 screws
(F)
at the top.
-Next mount the cover
(E)
and secure it with the screw
(C)
(figure 1) .
-Lastly position the ceramic top.
It is important to take special care when mounting the ceramic side panels
(CP)
and the sheet metal support
(SA)
in order to prevent
irregular bending which could cause breakages not covered by warranty.
Small imperfections on the surfaces of the ceramics such as: dimples, shivering and slight colour variations are normal characteristics
of handcrafted ceramics which make each piece unique. Remove any stickers from the brass bushes to facilitate screwing in the
screws M3.
E
CT
R
SA
S
CP
D
C
ALLINEARE
SA
Dettaglio
SA
Q
P
O
KEY
Figure 1-2-3-4
Align
Detail
LEGENDA
Figura 1-2-3-4
Allineare
dettaglio
