Thermon Tracenet Genesis, Installation, Operation, Maintenance Manual

Page: 34 / 36

34
TraceNet Genesis Panel Customer Modbus Memory Map
Circuit Settings
FUNCTION
CODE
Memory Location
(CKT1)
Description Allowed Values
DEC HEX
Add CKT# x 100 to Base Memory Location to get the MODBUS Data Address
CKT 1's Maintain Temp = 101+ 1*100 = 101 (0x0064)
CKT 72's Maintain Temp = 101 + 72*100 = 7201(0x1C21)
(Values below represent ckt 1's location)
03/06 100 0x0064 Alarm Acknowledge Bit Value
0x8000(bit) High Current Trip
0x4000(bit) Programing error
0x2000(bit) Current over .5A when circuit off
0x1000(bit) High Ground Trip bit
0x0800(bit) RTD Fault No Communication
for all assigned RTD's
0x0400(bit) High Temperature trip
0x0200(bit) RTD Fault ( all assigned RTD's in fault)
0x0100(bit) Not Used
0x0080(bit) High Current
0x0040(bit) Low Current
0x0020(bit) Circuit Fault
0x0010(bit) High ground current
0x0008(bit) RTD Fault No Communication
0x0004(bit) High temperature Alarm
0x0002(bit) RTD Fault (one or more assigned RTD's in fault)
0x0001(bit) Low temperature Alarm
03/06 101 0x0065 Maintain temp 10x True Value
03/06 102 0x0066 Control Band 10x True Value
03/06 103 0x0067 High Temperature Trip Alarm
03/06 104 0x0068 High Temp Alarm
03/06 105 0x0069 Low Temp Alarm 10x True Value
03/06 106 0x006A High Ground Fault Trip Alarm Value in (ma)
03/06 107 0x006B High Ground Fault Alarm Value in (ma)
03/06 108 0x006C High Current Alarm Trip 10x True Value (A)
03/06 109 0x006D High Current Alarm 10x True Value (A)
03/06 110 0x006E Low Current Alarm 10x True Value (A)
03/06 111 0x006F Circuit Enable/ Status Bit definitions
0x0008(bit) Heater Forced Off = 1 normal = 0
0x0004(bit) Heater Forced On = 1 normal = 0
0x0002(bit) Heater Tripped = 1 normal = 0
0x0001(bit) Heater Enabled = 1 , Disabled = 0
03/06 112 0x0070 Control Type 0 = On/Off
1 = On/Off with a Soft Start
2 = Proportional
3 = Ambient Proportional Mechanical
4 = PID
03/06 113 0x0071 Number of RTDs per Circuit 1 to 20
03/06 114 0x0072 RTD Fault power Range = 0 to 100%
03/06 115 0x0073 Power Clamp Range = 0 to 100%
Circuit Readings
Function
Code
Base Memory Location
(CKT1)
Description Notes
Appendix D: Genesis Modbus Memory Reference