Thermoline Scientific Equipment TI-150F, Operating Instructions Manual

Page: 12 / 16

P a g e | 12
17/03/11
function, the cool time will depend on the size of the incubator and ambient
conditions.
7.
Now that the program has been entered use the “Scroll” key to run the
program:
8.
After “P.CYCL” press the “Scroll” key
again to step through to the next
parameter which would be “ res t.stat ”.
This symbol refers to “Timer status” “reset”, which means
that the program (or timer), is in the reset mode and is not running. The status
can be “
Res ”, “ Run ” or “ Hold ”, leave the program in reset mode until after
entering the program.
With the display showing “ T.STAT” “Res ”, use the “Raise” key
to run the
program:
9.
You will note that the screen displays “RUN” at the bottom whenever the
program is running.
10. Note that at any time during the program the segment can be held by
changing from “ RUN ” mode to “ HOLD ”